Our Products:

The UV laser  marking machine utilizes a 355nm UV laser  source. Compared with  infrared lasersthe 355nm ultraviolet laser  features an extremely small  focused spotwhich can significantly reduce mechanical deformation of materials and  minimize heat  impact during processing. This machine is mainly  used  for  ultra-fine marking and  engraving and  is particularly suitable for  marking food and  medical packaging materials.

 Low energy  consumption

UVlaser generatorlow energy  consumptioneasy maintenance.

Fast speed

Marking speedhigh efficiency.

ptional lens

Optionallenses are used for different marking  areas

Marking Speed ≤7000mm/s

Repeatability ±0.003mm

Power requirements Single-phase 220v/50hz/15

Gross power 1KW

Repetition rate 3w/5w

Our Products:

The  UV laser  marking machine utilizes a 355nm UV laser  source. Compared with infrared lasersits 355nm ultraviolet laser  beam  focuses into  an extremely small  spot which can  significantly reduce mechanical deformation of materials and  minimize heat impact during processing. It is mainly  used  for  ultra-fine marking and  engravingand is especially suitable for  marking food and  medical packaging materials.

Fine marking

The beam quality is goodand the focused spot is smallwhich enables ultra-fine marking.

Small heating area

The thermal affected area is very smalland there is no thermal effect and material burning problem.

Nonmetal

Laser power is large,can be applied to a variety of non-metallic products for engraving,cutting.

Scope of application

A wider range of applications

Laser power 3W/5W

Repetition rate 10-200KHz

Mark range 110*110mm

Mark line width 0.02mm

Mark depth 0.5mm

Our Products:

C02 laser marking  machines create permanent marks on the surfaces of non-metallic,organic materials,and even some  metal products by electronically stimulating carbon dioxide  gas to generate laser beams. They can mark various  materials including bamboo productswoodacrylicleatherglassarchitectural ceramics,paper,and pp materials.

Low energy consumption

Co2 laser generator,low energy consumption,easy maintenance.

Compact  design

Compact design,1150mmx550mmx660mm.

Optional lens

Optional lenses are used for different marking areas.

Suitable for assemble line

The flying laser marking machine is a model designed for high-speed assembly line operations. It is widely used in the food and packaging industries for marking dates,barcodes,and QR codes.

Repetition rate 0-25KHZ

Laser power 35W

Minimum  line width 0.02mm

Mark range 110x110mm/or custom

Mark depth ≤0.4mm(material)

Our Products:

C02 laser marking  machines create permanent marks on the surfaces of non-metallic,organic materials,and even some  metal products by electronically stimulating carbon dioxide  gas to generate laser. They can mark a variety  of materials such as bamboo products,wood,acrylic,leather,glass,architectural ceramics,paper,and PP materials.

Environmental protection

Clear markingnot easy to wear; High engraving and cutting efficiency,environmental protection and energy saving.

Free control

High marking accuracy,fast speed,free control of engraving depth.

Nonmetal

Laser power is large,can be applied to a variety of non-metallic products for engraving,cutting.

Low cost

No consumables,low  processing cost,laser working life of up to 20-30,000 hours.

Laser wavelength 10.64μm

Laser power 30w/55w options

Repetition rate ≤25KHz

Machining accuracy 0.01mm

Minimum line width 0.02mm

Our Products:

It can be lifted with one hand with only 13KG weight;More suitable forbig-size item marking,and vertical surface marking;Can be used wirelessly outdoor with lithium batteries;Self-developed,Touch screen operating system design,no need to configure a computer.

Low  energy consumption

low energy  consumption,easy maintenance.

Compact design

Compact  design,155*70*245mm.

Optional lens

Optionallenses are used for different marking areas

Mark line width 0.02mm

Applicable power 20-50W

Laser wavelength ≤1064nm

Marking speed ≤7000mm/s

Voltage 220V/150Hz/800W (110V/60Hz)

Our Products:

Handled Laser part is small portable and flexible to move by hand,suitable for markingheavy workpieces which are difficult to move and marking vertical surface.This laser marking machine adopts fixed automatic focusing bracket.

Environmental protection

Clear marking,not easy to wear;High engraving and cutting efficiency,environmental protection and energy saving.

Free control

High marking accuracy,fast speed,free control of engraving depth.

Low cost

No consumables,low processing cost,laser working life of up to 20-30,000 hours

The fiber laser marking machine generates a high-energy continuous beam through a laser generator. When the laser acts on the substrate material atoms in the ground state transition to a higher energy state. These high-energy atoms are unstable and quickly return to the ground state releasing excess energy in the form of photons during this process. The light energy is then converted into heat energy causing the surface material to vaporize-even before it has time to melt-thereby forming durable marks on the surfaces of various substances.

Widely used

Suitable for a variety of industries can mark most of the metal materials.

Mobile phone operation

In addition to the general computer control can also be mobile phone control devices to work.

Supports multiple file formats

Operating software supports AI PLT DXF BMP JPEG and other software output most of the formats.

Small spot

Smaller focused spots and higher energy density are suitable for more precise cutting drilling and engraving.

Wage range 70x70mm-300x300mm

Applicable power 20W-100W

Laser wavelength ≤1064nm

Marking speed ≤1OOOOmm/s

Laser repetition rate 1 KHZ-100KHZ

The fiber laser marking machine generates a high-energy continuous beam through a laser generator. When the laser acts on the substrate material,atoms in the ground state transition to a higher energy state. These high-energy state atoms are unstable and quickly return to the ground state releasing excess energy in the form of photons during this process. The light energy is then converted into heat energy,causing the surface material to vaporize–even before it has time to melt–thereby forming durable marks on the surface of different substances.

Various materials

Suitable for a variety of industries can mark most of the metal materials.

Fast and effcient

No consumables are required reducing costs and maintenance

Supports multiple file formats

Operating software supports AI,PLT,DXF,BMP,JPEG and other software output most of the formats.

Stalble performance

Small heat affected zone to avoid damaging materials; High yield.

Mark line width 0.02mm

Applicable power 20W-100W

Laser wavelength ≤1064nm

Marking speed ≤7000mm/s

Voltage 220V/50Hz/800W(110V/60Hz)

Our Products:

The fiber laser marking machine generates a high-energy continuous beam via its laser generator,enabling it to create durable marks on the surfaces of various materials. When the laser acts on the substrate,atoms in the ground state transition to a higher energy state. These high-energy atoms are unstable and quickly return to the ground state,releasing excess energy in the form of photons (quanta) during this process. Thelight energy is then converted into heat energycausing the surface material to vaporize–even before it has time to melt–thereby forming images and text.

Arbitrary mark

Can mark any graphics,text,bar code,two-dimensional code,can realize automatic numbering.

Long-term retention

After the laser marking machine marking,it does not disappear naturally,but will be retained for a long time.

Supports multiple file formats

Operating software supports AI,PLT,DXF,BMP,JPEG and other software output most of the formats.

Small spot

Smaller focused spots and higher energy density are suitable for more precise cuing,drilling and engraving.

The fiber laser marking machine generates a high-energy continuous beam via its laser generator. When the laser acts on the substrate material,atoms in the ground state transition to a higher energy state. These high-energy atoms are unstable and quickly return to the ground state,releasing excess energy in the form of photons (quanta) during this process. The light energy is then converted into heat energy,causing the surface material to vaporize-even before it has time to melt-thereby forming durable marks,images,and text on the surfaces of various substances.

Precision reduction

While ensuring the machine’s performance,the all-in-one fiber laser marking machine features a precise yet simplified design.

Fast and efficient

No consumables are requiredreducing costs and maintenance.

Supports multiple file formats

Operating software supports AI,PLT,DXF,BMP,JPEG and other software output most of the formats.

Stable performance

Small heat affected zone to avoid damaging materials; High yield.